Audi S3 8V Performance Racing Sachs Performance with press, ceramic disc and light volant monomas

Characteristics

Turning: 15% more than OEM embrace

More optimized power transmission

A conventional embrace is usually tired when it reaches high temperatures and then patins against the pressure disk causing a loss of par strength.

The Embrace Kit Sachs Performance it stands up to 50% more temperature and load compared to the original OEM embrace.

Disc with improved organic compound

The organic compound of Sachs Performance it is free of asbestos and dangerous substances, it stands much more the temperature in circumstances of extreme demand, retaining the motor pair and motority under high mechanical demand.

Higher thermal capacity

Longer life of friction forums

Strengthened Press

The press Sachs Performance they have a more strengthened diaphragm mold system than the OEMs, with a more quality elastic steel that endure fatigue and with a higher thermal capacity.With all this, a greater transmission of pair and power of up to one 40procent high mechanical stress.

Greater press bite and less press abrasion.

The inertia monomasa wheel

OEM bimasa origin wheels are usually heavy and double-mass to ensure a high walking comfort for the occupants of the vehicle, the engine response and acceleration is much faster and energetic but, on the contrary, you have to keep in mind that this plus of comfort that carries the OEM bimasa and can amplify the noise from the change.

Reduction of up to 60% in weight compared to the OEM wheel

Maximum RPM increase (up to 12,000 rpm in some models)

Longer life of embrague

Tacto and stable embrague route

Because conventional embraces heat much more and the material expands, the disc and press contact point can impact on the pedal route.

The Compound of Sachs Performance it has a heat extension coefficient up to 200% less compared to the original piece, keeping an excellent touch and pedal route.

To compensate for the removal of the bimasa wheel amortizator to reduce vibrations, reinforced overload molds are incorporated into the disk core, which make the times of amortizator

This kit is especially suitable for vehicles with chips that modify power, centrality reprogramming, tandas and track days on circuits and several competitive applications.

Important note :
The original inertia wheels are praised and imbalanced with the use and passage of time.It is highly recommended to change the inertia wheel or at least bring it to balance.
The embrace kits mounted with old wheels lack guarantee regarding the appearance of vibrations.