High performance Intercooler Kit Mishimoto top mount Subaru STI 2015-

The Torque Specs 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps.These clamps have an operating range of 18-35 in-lbs (2-4N*M).Do not exceed the maximum torque rating of 35 in-lbs (4N*M).

22 in-lbs (2.5N*M) recommended for all worm-gear clamps.These clamps have an operating range of 18-27 in-lbs 2-3N*M.Do not exceed the maximum torque rating of 27 in-lbs (3N*M).

Silicone Couplers (1) Turbo to Hot Pipe Coupler (for stock turbo)
(1) Turbo to Hot Pipe Coupler (for aftermarket turbo)
(1) 5.71 cm – 6.35 cm Silicone Transition Hose
(1) 6.35 cm – 6.98 cm Transition Coupler
(1) 6.98 cm Straight Coupler

Buying Included (1) bar-and-plate intercooler
(1) steel crash bar w/ mounting hardware
hot side intercooler pipes
cold side intercooler pipes
bpv flange adapter
(1) turbo to hot pipe coupler (for stock turbo)
(1) turbo to hot pipe coupler (for aftermarket turbo)
(1) 2.25" – 2.5" Silicone Transition Hose
(1) 2.5" – 2.75" transition coupler
(1) 2.75" straight coupler
(2) 2.5" – 2.75" Intercooler to Pipe Hoses
BPV recirculation hose
(2) 1.5" t-bolt clamps
(1) 2.00" t-bolt clamp
2.5" t-bolt clamps
2.75" t-bolt clamps
(5) 3" t-bolt clamps
bypass valve gasket
(2) 6" of thermal wrap
The Sound Symposer Plug

Note filter re-oil is not included with the lifetime warranty

Mishimoto recommends that this intercooler kit, with or without the optional air intake, is not used with the stock ECU programming.It is highly recommended that the customer is able to retune the vehicle’s ECU after installing the intercooler kit.Power gains will vary depending on the size of the turbo, exhaust system, fuel system, and type of ECU tune that is applied to the vehicle.

This kit is rated for approximately 600 whp, or 30 psi of turbo boost.Exceeding these horsepower or pressure limits may require a custom-sized front-mount intercooler.

THIS FRONT-MOUNT INTERCOOLER KIT WILL NOT FIT WITH THE MISHIMOTO 2015+

Pipe diameter 6.35 cm – 6.9 cm Intercooler to Pipe Hoses

Constant Tension T-Bolt Clamps Specs (2) 3.81 cm T-Bolt Clamps
(1) 5.08 cm T-Bolt Clamp
6.35 cm T-Bolt Clamps
6.9 cm T-Bolt Clamps
(5) 7.62 cm T-Bolt Clamps

Core Thickness 3.5

Hot-Side Intercooler Pipe Specs made from polished mandrel-bent aluminum

Crash Bar Specs Tubular Steel Construction with Black Powdercoat
Application-specific mounting holes
of 6.5 lbs

Intercooler/Throttle Body Coupler Specs – 8.25 cm length
– 6.9 cm I.D.
– 7.62 cm O.D.
4mm thick

STI BPV Hose Specs – application-specific bend for this kit
– 1.25” I.D.
OF 1.50” O.D.
4mm thick

Engine Codes THE 257

Chassis Codes TO

Fits 2015 Subaru WRX STI

Weight 25 lbs

Coating The Powder Coated

Tank Wall Thickness 3.5

By Max Rec.THE PSI 30

Outlet 2.75

Core Length 28

Core Height 8.05

Core Width 3.5

Inlet 2.75

Core Size 28 x 8.05 x 3.5

The Width 5.4

Overall Height 8.6

Total Length 377

Construction Bar and plate

By Max Rec.HP 600